Illumipeak™ Retrofit Lighting Kit (Sport)

$275.00
SKU
IRFSPO

Sport Series Illumipeak™ adds bright, integrated LED lighting directly to the peak of your canopy frame, helping create a clean, professional setup for evening events, markets, trade shows, motorsports, and outdoor activations. This patent-pending retrofit system replaces the standard Sport Series peak pole and remains installed after the initial setup.

Dual-peak lighting: The 10x15 and 10x20 Sport Series frames require two (2) Illumipeak™ units for balanced coverage across the full canopy area. Both lights connect using the included link cable and can operate from a single mains power adapter or one optional battery pack.

  • Fast One-Time Retrofit Installation
  • Replaces the Existing Sport Series Peak Pole
  • 5000K 360° LED Illumination
  • Touch On/Off and Hold-to-Dim Controls
  • Optional 10+ Hour Battery Power (Buy Here)
  • Fits 10x10, 10x15, and 10x20 Sport Series Frames
  • Daisy-Chain Connection for 10x15 and 10x20 Frames
  • Patent Pending

Sport Series Illumipeak™ Integrated Lighting Kit

Bring professional lighting directly into your Sport Series canopy with Illumipeak™, a patent-pending retrofit LED lighting system designed to replace the standard peak pole inside the frame. The kit requires a simple one-time installation of approximately 10 minutes and remains fitted to the canopy frame for future use.

Positioned at the highest point of the structure, Illumipeak™ distributes bright, even light throughout the space beneath your canopy. Unlike hanging lamps or portable work lights, the integrated design keeps your setup clean, organized, and free from unnecessary overhead cables or bulky lighting fixtures.

The built-in touch control makes operation simple. Tap the sensor to turn the light on or off, then press and hold to increase or decrease the brightness. This allows you to quickly adjust the lighting for product displays, customer interactions, food service, motorsports, outdoor markets, festivals, and evening events.

Available for 10x10, 10x15, and 10x20 Sport Series Canopies

The Sport Series Illumipeak™ Retrofit Kit is available exclusively for 10x10, 10x15, and 10x20 Sport Series frames. The number of lighting units required depends on the size and number of peaks in your canopy frame.

  • 10x10 Sport Series: Uses one Illumipeak™ lighting unit powered by the included mains power adapter or an optional battery pack.
  • 10x15 and 10x20 Sport Series: Use two Illumipeak™ lighting units to provide balanced illumination across the full canopy footprint.

Dual-Peak Lighting for 10x15 and 10x20 Frames

For larger Sport Series canopies, both Illumipeak™ units connect together using the included link cable. This daisy-chain configuration allows the complete lighting system to operate from a single power source, helping reduce cables and simplify your setup.

  • One Power Connection: Run both Illumipeak™ units from one compatible mains power adapter.
  • Optional Wireless Operation: Connect the system to an optional 10Ah or 15Ah Battery Pack when electrical outlets are unavailable.
  • Consistent Canopy Coverage: Two integrated lights help distribute illumination evenly beneath 10x15 and 10x20 canopy setups.

This retrofit kit is designed specifically for compatible Rocket Canopy Sport Series frames in 10x10, 10x15, and 10x20 sizes. It is not intended for use with other canopy frame ranges or sizes.

Key Features:

  • Patent-Pending Integrated Design: Replaces the original Sport Series peak pole to become part of the canopy frame.
  • Bright 360° LED Coverage: Directs light vertically and horizontally to illuminate the area beneath the canopy.
  • Touch-Control Operation: Tap to switch the light on or off and press and hold to adjust the brightness.
  • Compatible Sport Series Sizes: Available for 10x10, 10x15, and 10x20 canopy frames.
  • Daisy-Chain Capability: Connect two lighting units together and operate them from one power source.
  • Battery-Powered Option: Add a compatible 10Ah or 15Ah Battery Pack for portable, off-grid lighting.
  • Clean, Cable-Managed Setup: Eliminates the need for separate hanging lights or temporary fixtures beneath the canopy.
  • One-Time Retrofit Installation: Installs in approximately 10 minutes and remains attached when the frame is folded and stored.

Download our step-by-step instructions for installing your Illumipeak™ Retrofit Kit, instructions for properly installing the Illumipeak Battery, plus how to use the daisy-chain cable with dual peak setups.

Included in Single Kit:

  • 1x Illumipeak LED Peak Pole
  • 1x Control Housing with Touch Sensor Dimmer & Power Button
  • 1x Power Adapter (72W)
  • 1x Nylon Carry Case for Power Adapter
  • Mounting Clips & Cable Ties Pack
  • Quick Start Installation Guide

Included in Dual Pack Kit:

  • 2x Illumipeak LED Peak Pole
  • 2x Control Housing with Touch Sensor Dimmer & Power Button
  • 1x Power Adapter (180W)
  • 1x Daisy Chain Link Cable
  • 1x Nylon Carry Case for Power Adapter
  • Mounting Clips & Cable Ties Pack
  • Quick Start Installation Guide
Input Voltage 24V DC
Light Output 5000K White
Power Consumption 36W
Peak Pole Material Clear Polycarbonate
Boxed Product Weight 7 lbs
Use Indoor/Outdoor
Warranty 1-year
Patent Pending
To Top